IndexJournalWriterPagingImpl was modified to not page on number of entries written, but number of (equivalent uncompressed) bytes written.
Since the failure mode if too much data is written per file is quiet corruption of the index, the former behavior was extremely fragile. The new behavior should consistently ensure that the data is sufficiently small to not cause any integer rollovers.
The change in 6dcc20038c was reverted, as there is really no sane reason to have this configurable in software.
The RandomFileAssembler implementations, introduced in commit 53c575db3f were all acting subtly differently. The RWF implementation wrote BigEndian longs instead of the native endianness used by the other implementations (and expected by the index construction code), further the mmap implementation exposed a bug in LongArray.write() that caused it to create a larger file than necessary.
A test was built to ensure the output of these implementations is equivalent.
To cope with writing large files out of order, the system needs some form of strategy to avoid writing them directly to disk, as this causes insane amounts of disk thrashing. By default, the data is just buffered in RAM. This works well on a large server, but smaller systems struggle.
To help systems with small RAM process large amounts of data, the old RandomWriteFunnel is brought back if the system property 'system.conserve-memory' is set to true. RandomWriteFunnel is buffering the construction by creating a series of small files that pigeonhole the writes into rough neighborhoods, and then it goes over the files one by one to construct one area of the file at a time. This is relatively slow and uses more than twice the disk size.
A new interface RandomFileAssembler is introduced as an abstraction for this operation. A third strategy, direct mmaps, is also introduced if the file is very small (less than 1 GB). In this domain, disk thrashing is unlikely since it will comfortably fit in RAM.
This update enhances the SideloaderProcessing and DocumentClass modules to specially handle sideloaded wiki documents. Wiki content is generally truncated to the first paragraph, which generally tends to be too short to be included independently. An additional DocumentClass (SIDELOAD) has been introduced to suppress the length check in this case.
Wrote a new test to examine the redirect behavior of the crawler, ensuring that the redirect URL is the URL that is reported in the parquet file. This works as intended.
Noticed in the course of this that the crawler doesn't add links from meta-tag redirects to the crawl frontier. Added logic to handle this case, amended the test case to verify the new behavior. Added the meta-redirect case to the HtmlDocumentProcessorPlugin as well, so that we consider it a link between documents in the unlikely case that a meta redirect is to another domain.
The flag is `system.languageDetectionModelVersion`.
* If negative, no model is used.
* If 0, both models are used.
* If 1, the old crappy model is used.
* If 2, the new fasttext model is used.
The flag is `system.languageDetectionModelVersion`.
* If negative, no model is used.
* If 0, both models are used.
* If 1, the old crappy model is used.
* If 2, the new fasttext model is used.
The production configuration assumes all content of interest is 7 bit ASCII, and makes a series of optimizations based on this. This assumption holds poorly in the wild.
Adding an **experimental** system property 'system.noFlattenUnicode', that when set to TRUE, will disable this behavior.
IMPORTANT!! The index needs to be re-constructed when this flag is changed, as different hash functions are selected for the keyword->identifier mappings.
Since the bleed-flags set by the anchor tags logics have been changed to Site and SiteAdjacent, give them a bit of more importance when set together with ExternalLink.
UrlDomain and UrlPath are also only more consistently only rewarded once.
This adds a single-node barebones configuration to the install script. It also moves the log4j configuration into system.properties, and sets assertions to disabled by default.
This changeset adds an action for downloading a set of sample data from downloads.marginalia.nu.
It also refactors out some leaky abstractions out of FileStorageService. allocateTemporaryStorage has been renamed allocateStorage. The storage was never temporary in any scenario...
It also doesn't take a storage base, as there was always only one valid option for this input. The allocateStorage method finds the appropriate base itself.
This will avoid having to dig in the message queue to perform this relatively common task.
The control service was also refactored to extract common timestamp formatting logic out of the data objects and into the rendering.
It's a mistake to let it bleed into Title, as this is a high quality signal. We'll co-opt Site and SiteAdjacent instead to reinforce the ExternalLink when count is high.
This avoids concurrent access errors. This is especially important when using Unsafe-based LongArrays, since we have concurrent access to the underlying memory-mapped file. If pull the rug from under the caller by closing the file, we'll get a SIGSEGV. Even with a "safe" MemorySegment, we'll get ugly stacktraces if we close the file while a thread is still accessing it.
So we spin up a thread that sleeps for a minute before actually unmapping the file, allowing any ongoing requests to wrap up. This is 100% a hack, but it lets us get away with doing this without adding locks to the index readers.
Since this is "just" mmapped data, and this operation happens optimistically once a month, it should be safe if the call gets lost.
The sideload instruction in the stackexchange template was updated. The instruction now states that stackexchange data will be loaded from a directory on the server and directs users to a new documentation url for more detailed information.
The method `isApplicable` in the `PlainTextDocumentProcessorPlugin` was refactored to handle a wider range of content types beyond merely "text/plain". It now also handles any content type that starts with "text/plain;", to accomodate contentTypes that append a charset as well.
Removed the need to have to run an external tool to pre-process the data in order to load stackexchange-style data into the search engine.
Removed the tool itself.
This stirred up some issues with the dependencies, that were due to both third-party:ing xz and importing it as a dependency. This has been fixed, and :third-party:xz was removed.
java.lang.Error:s were not handled properly, leading to mismatch in the bookkeeping of the FSMs. These are now caught, acted on, and re-thrown.
MqSynchronousInbox also no longer assumes all exceptions are InterruptedException.
This commit extracts several previously hardcoded configuration properties, and makes then available through system.properties.
The documentation is updated to reflect the change.
Dead code was also removed in the process. CrawlSpecGenerator is left feeling a bit over-engineered still, since it's built for a more general case, where all other implementations but the current one are removed, but we'll leave it like this for now as it's fairly readable still.
Previously, in order to load encyclopedia data into the search engine, it was necessary to use the encyclopedia.marginalia.nu converter to first create a .db-file. This isn't very ergonomic, so parts of that code-base was lifted in as a 3rd party library, and conversion from .zim to .db is now done automatically.
The output file name is based on the original filename, plus a crc32 hash and a .db-ending, to ensure we can recycle the data on repeat loads.
The change adds a new column to the MESSAGE_QUEUE table called AUDIT_RELATED_ID. This field is populated transparently, using a dictionary mapping Thread IDs to Message IDs, populated by the inbox handlers.
The existing RELATED_ID field has too many semantics associated with them,
among other things the FSM code uses them this field in tracking state changes.
The change set also improves the consistency of inbox names. The IndexClient was buggy and populated its outbox with a UUID. This is fixed. All Service2Service outboxes are now prefixed with 'pp:' to make them even easier to differentiate.
